LMR Cable

Product Details:

NETBOON has emerged as the leading manufacturer, supplier, trader and exporter of the wide range of RF Coaxial Cables, which is manufactured from high grade of raw materials. The LMR 200 Low Loss Coax Cables are high performance coaxial communications cables designed for use in virtually all Wireless System RF Applications. The cables are more flexible than corrugated cables. LMR200 Cable is made up of heavy copper wires inside, which receive and transferred the indication faster without any interruption. LMR200 is an outdoor rated flexible low loss communications coax cable. It is great for short antenna feeder runs. There is no indication loss in LMR200 Coaxial Cable; also best for long-lasting or rough & tough use.We supply a huge selection of top of the range Low Loss RF Coaxial Cables. We make sure that all our products are thoroughly tested so that we can ensure that your product is top quality. For more info@ please call +91 9893014112. 

Additional Information:

• Delivery Time: 2-5 Working Days

Product Details:

NETBOON has evolved to be the most trusted manufacturer, supplier, trader and exporter of the most efficient range of RF Coax Connectors.

<sub>KEY SPECIFICATION:

Jacket Color: Black</sub>    

_{Nominal Size: ½” half inch} 

_{Jacket Material: PE (Polyethylene)}

_{Dielectric Material: Foam PE}

_{Outer Conductor Material: Corrugated copper tube}

_{Inner Conductor Material: Copper clad aluminum wire} 

_{Flexibility: Standard}

_{Velocity: 88%}

_{Impedance: 50 ohm ±1 ohm}

_{Operating Frequency Band: 1 – 8800 MHz}

_{Maximum Frequency: 8.8 GHz}

_{Installation Temperature: 40°C to +60 °C} 

We supply a huge selection of top of the range RF Coax Connectors. We make sure that all our products are thoroughly tested so that we can ensure that your product is top quality.

Additional Information:

• Delivery Time: 2-5 Working Days

Product Details:

We are involved in present an exclusive range of LMR 400 Coaxial Cable. Our products are available in diverse specifications that meet on exact requirements of our patrons.

 

Features:

• LMR 400 Cable with 50 Ohm, N-Male Connector Ends, Double Shield, flexible UV proof PE, 0.405
  Request
  Callback
  
  
  

  Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: Bhopal
  • Production Capacity: 10000
  • Delivery Time: 2-5 Days

Product Details:

LMR 200 Low Loss Coaxial Cable with Double Shield, flexible UV proof PE. This low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. LMR-200 coaxial cable provides excellent performance for high power HF needs or VHF/UHF applications. Because of its solid center conductor, it is rather stiff. LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period. Bending and handling significantly better than air-dielectric/corrugated hardline cable.

 

Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.

 

Features:

• Premium Quality: LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period.
• 200LMR Cable Design: To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss.
• Reduces Interference: This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference.
• Low Loss Cable: Ultra low loss characteristics ensure maximum performance of your external antenna installation.

Additional Information:

• Item Code: LMR200
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 500
• Delivery Time: 2-5 Days

Product Details:

We are offering LMR 400 Low Loss Coaxial Cable to our clients. LMR 400 Cable with 50 Ohm, N-Male Connector Ends, Double Shield, flexible UV proof PE, 0.405

Additional Information:

• Item Code: 400LMR-1M
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Delivery Time: 2-5 Days

Product Details:

NETBOON has evolved to be the most trusted manufacturer, supplier, trader and exporter of the most efficient range of RF Coaxial Cables.
LMR400 Coaxial Cables are high performance coaxial communications cables designed for use in virtually all wireless system RF applications. The cables are more flexible and sturdy then corrugated cables and exhibit much lower loss than traditional RG cables. The PE jacket used on LMR400 makes it much tougher and able to stand abrasion and take a beating. It also makes it a bit less flexible. Low Loss Flexible Outdoor LMR 400 Coaxial Cable Double Shielded with White PE Jacket. 
We supply a huge selection of top of the range RF Coaxial Cables. We make sure that all our products are thoroughly tested so that we can ensure that your product is top quality. 

Additional Information:

• Delivery Time: 2-5 working days

Product Details:

OXYWAVE low loss LMR coaxial cable is designed to transmit the maximum signal to your antennas. In this high quality cable, the dimensions and spacing of the conductors are uniform. To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric to maintain the proper spacing between conductors and shielding to assure maximum signal transmission and lowest loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. This LMR Cables double Shielded LMR braided cable used for Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster. 

Product Specifications & Features:

Low Loss Cable: Ultra low loss characteristics ensure maximum performance of your external antenna installation. 

 

High Quality: LMR cable is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period.

 

LMR Cable Design: To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss.

 

Reduces Interference: This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference.

 

Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.

Additional Information:

• Item Code: LMR
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 1000000m
• Delivery Time: 2-3 Days

Product Details:

OXYWAVE low loss LMR200 coaxial cable with TNC Male connector is designed to transmit the maximum signal to your antennas. In this high quality cable, the dimensions and spacing of the conductors are uniform. To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. This 200 LMR Cables double Shielded 200LMR braided cable used for Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster. Technical 

Product Specifications & Features:


 

Low Loss Cable: Ultra low loss characteristics ensure maximum performance of your external antenna installation. Technical support call . 

 

High Quality: LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period. 

 

200LMR Cable Design: To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss. 

 

Reduces Interference: This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference. 

 

Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster. 

Additional Information:

• Item Code: LMR200TNCMALE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 500
• Delivery Time: 2-3 Days

Product Details:

OXYWAVE Premium quality LMR200 low loss coaxial cable with SMA-Female connector is designed to transmit the maximum signal to your antennas. In this high quality cable, the dimensions and spacing of the conductors are uniform. To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. This 200 LMR Cables double Shielded 200LMR braided cable used for Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster. 
Product Specifications & Features:

• Premium Quality: LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period.
• 200LMR Cable with SMA-Female Connector Design: To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss.
• Reduces Interference: This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference.
• Low Loss Coxial Cable: Ultra low loss characteristics ensure maximum performance of your external antenna installation.
• Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.

Additional Information:

• Item Code: LMR200SMAFEMALE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 500
• Delivery Time: 2-3 Days

Product Details:

OXYWAVE Premium quality LMR200 low loss coaxial cable with RP SMA Male to RP SMA Female RF Connectors is designed to transmit the maximum signal to your antennas. In this high quality cable, the dimensions and spacing of the conductors are uniform. To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss. The connectors used with the coax must also hold the correct spacing through the body of the connector to avoid signal loss. This 200 LMR Cables double Shielded 200LMR braided cable used for Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.
Product Specifications & Features:

• 200LMR Cable with RP SMA Male - RP SMA Female Connector Design: To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss.
• High Quality: LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period.
• Reduces Interference: This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference.
• Low Loss Cable: Ultra low loss characteristics ensure maximum performance of your external antenna installation.
• Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.

Additional Information:

• Item Code: LMR200SMAMALE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 500
• Delivery Time: 2-3 Days

Product Details:

Description:

NETBOON is a manufacturer and trader of best & high quality antenna. 12dBi LPDA antenna has rugged waterproof structure which is designed to withstand damage from wind, rain, heat, fog. High gain wideband LPDA features N- female connector which is waterproof, temperature resistant and transfer high frequency information. Outdoor LPDA antenna increases signal strength and suitable for rural as well as urban areas.

Although, HLF/LMR 400 cable is low loss coaxial cable specially designed for external use. It provides outstanding performance.  This complete antenna & cable set helps in improving signal strength of 4G LTE GSM router modem.

Installation:

Fix this 12dBi LPDA antenna in pole of your building as high as possible with the help of screws & clamps provided along with the antenna. Screw it properly overthere, then connect the HLF/LMR 400 cable with antenna as well as with your router.

Electrical properties:

Gain: 12dBi

Impedance: 50 Ohm

Frequency range: 698M -2700MHz

Polarization: Directional

Package weight: 1605 gram

Antenna connector: N-female

Cable type: HLF/LMR 400 coaxial cable

Cable length: 10 meter

Cable connector: N-male to SMA male connector

 

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 days
• Packaging Details: 1¿¿ 12dBi LPDA antenna, 1¿¿ HLF/LMR 400 cable 10 meter

Product Details:

Description:

NETBOON is amongst the top manufacturer, supplier, trader, wholesaler, exporter and importer of dual LPDA antennas with HLF LMR cable. High gain LPDA antenna is lightweight, heavy duty, corrosion resistant and compactly designed antenna. MIMO LPDA features a rugged waterproof structure which protects antenna from rain, fog, wind, and heat. MIMO LPDA antenna with LMR 400 cable provides you double signal which being sent & receive into the device. Although, LMR cable is specially designed for use in outdoor environments because, it features a UV resistance & water resistance cable. LMR 400 cable is ultra low loss coaxial cable which reduces the signal loss. This cable features N male to SMA male connector which increases the wifi data speed of your device.

Installation guide:

For installation, you need to fix this Dual LPDA antenna at rooftop/ terrace & connect the cable HLF/LMR 400 with that as well as with the router.

Electrical properties:

Gain: 12dBi

Impedance: 50 Ohm

Frequency range: 698-2700MHz

Polarization: Directional

Package weight: 3840 gram

Antenna connector: N-female

Cable type: HLF/LMR 400 coaxial cable

Cable length: 15 meter

Cable connector: N-male to SMA male connector

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 days
• Packaging Details: 2¿¿ 12dBi LPDA antenna, 2¿¿ HLF/LMR 400 cable 15 meter

Product Details:

LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period. This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference. Ultra low loss characteristics ensure maximum performance of your external antenna installation.

• Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.

Additional Information:

• Delivery Time: 2-5 Working Days

Product Details:

LMR 200 Low Loss Coaxial Cable Double Shield with N Female connector, flexible UV proof PE. This low loss transmission line can be used in almost any application where handling characteristics, improved shield and low loss is required. LMR-200 coaxial cable provides excellent performance for high power HF needs or VHF/UHF applications. Because of its solid center conductor, it is rather stiff. LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period. Bending and handling significantly better than air-dielectric/ corrugated hardline cable.

 

Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster.

 

Features:

• Premium Quality: LMR 200 standard is one of UV Resistant Polyethylene jacketed cables with 20-year outdoor usage time period.
• 200LMR Cable Design: To hold the shield at a uniform distance from the central conductor, the space between the two is filled with a dielectric designed to maintain the proper spacing between conductor and shielding to assure maximum signal transmission and lowest loss.
• Reduces Interference: This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference.
• Low Loss Cable: Ultra low loss characteristics ensure maximum performance of your external antenna installation.

Additional Information:

• Item Code: LMR200NFEMALE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 500
• Delivery Time: 2-3 Days

Product Details:

NETBOON is one of the best manufacturer & supplier of HLF 300/LMR 300 Coaxial Cable. This shielded cable can be bent and moderately twisted without negative effects, and can be strapped to conductive supports without inducing signal interference. Ultra low loss characteristics ensure maximum performance of your external antenna installation.

• Applications: Wi-Fi, Antenna Cables, Ham Radio, Patch Cables, Jumper Cables, WLL, GPS, WLAN, LMR, WISP, WiMax, SCADA, Mobile Antennas, Mobile Signal Booster, telecommunication, Wireless Communications Systems, Short Antenna Feeder runs, Jumper Assemblies,  etc.

Product Details:

Low Loss Coaxial LMR200 Cable with N Male to TNC Male RF Connector. 

Additional Information:

• Item Code: LMR200TNCFEMALE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,NEFT
• Port of Dispatch: Bhopal
• Production Capacity: 500
• Delivery Time: 2-3 Days

Product Details:

Description:

We are leading supplier & manufacturer of LPDA antenna and providing quality products to our customers. 12dBi High Gain LPDA antenna features N-female connector which is inside threaded, waterproof and corrosion resistance. Although, LMR/HLF 400 cable is ultra low loss coaxial cable which is specially designed for external environment. It is UV resistant, polyethylene jacketed cable which provides amazing performance. External LPDA antenna with HLF/LMR cable helps in improving signal strength of your 4G LTE GSM router modem and helps in maintaining signal quality.

Installation guide:

Fix this 12dBi LPDA antenna at rooftop/ terrace as high as possible with the help of screws, nuts & clamps provided with the antenna. Then, screw it properly and connect the HLF/LMR 400 cable with antenna as well as with your router.

Electrical specifications:

Gain: 12dBi

Impedance: 50 Ohm

Frequency: 698M -2700MHz

Polarization: Directional

Package weight: 2700 gram

Antenna connector: N-female

Cable type: HLF/LMR 400 coaxial cable

Cable length: 25 meter

Cable connector: N-male to SMA male connector

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 days
• Packaging Details: 1¿¿ 12dBi LPDA antenna, 1¿¿ HLF/LMR 400 cable 25 meter

Product Details:

Description:

We are one of the growing company in the field of manufacturing, supplying, trading, wholesaling, exporting and importing a wide array of MIMO LPDA antennas with HLF 400 cable. Dual LPDA antenna with cable provides you double signal which being sent & receive into the device. It provides high and adequate performance.  It can offers wireless services in remote as well as rural areas. Wideband multidirectional LPDA antenna are the great option for extending wifi data speed of your 4G LTE GSM router.

Whereas, LMR cable is specially designed for use in external environments because it features a UV resistance & water resistance cable. HLF 400 cable is ultra low loss coaxial cable which reduces the signal loss. This cable features N male to SMA male connector which increases the wifi data speed of your device.

Installation guidance:

For installation, you need to fix this Dual LPDA antenna at rooftop/ terrace & connect the cable HLF 400 with that as well as with the router.

Electrical properties:

Gain: 12dBi

Impedance: 50 Ohm

Frequency range: 698M -2700MHz

Polarization: Directional

Package weight: 2940 gram

Antenna connector: N-female

Cable type: HLF/LMR 400 coaxial cable

Cable length: 8 meter

Cable connector: N-male to SMA male connector

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 days
• Packaging Details: 2¿¿ 12dBi LPDA antenna, 2¿¿ HLF/LMR 400 cable 8 meter

Product Details:

Description:

NETBOON deals in supplying best quality LPDA antennas with LMR 200 coaxial cable. 12dBi external LPDA antenna is manufactured from heavy materialistic ABS plastic & durable material. This antenna is lightweight, small and easy to use in outdoor applications. Wideband LPDA antenna features N-female connector which is temperature resistance, waterproof and corrosion resistance antenna. Outdoor LPDA antenna is suitable for rural as well as urban areas.

Whereas, HLF/ LMR 200 cable is made from heavy copper wires inside threaded, compactly designed and flexible cable. HLF is ultra low loss coaxial cable features N male to SMA male connector which transfer high frequency information. This antenna & cable set increases signal strength of your device.

Installation:

Very easy to install, you just fix this 12dBi LPDA antenna in pole of your building and then, connect this antenna and router via LMR 200 cable.

Electrical specifications:

Gain: 12dBi

Impedance: 50 Ohm

Polarization: Directional

Package weight: 1470 gram

Antenna connector: N-female

Cable type: HLF/LMR 200 coaxial cable

Cable length: 8 meter

Cable connector: N-male to SMA male connector

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 days
• Packaging Details: 1 ¿¿ 12dBi LPDA antenna, 1¿¿ LMR/HLF 200 cable 8 meter

Product Details:

Description:

We are leading manufacturer, supplier, trader, exporter, importer, and wholesaler of wide varieties of antennas. 12dBi dual LPDA antenna is well constructed, made from ABS plastic & durable material and has adequate performance. MIMO LPDA antenna is small, lightweight and mostly suitable for external applications. Dual LPDA antenna & cable set provides double signal which being sent & receive into the device.  Although, it is used with low loss RG-8 coaxial cable which provides massive improvement in wifi data speed of your 4G LTE router inside your house, office, basement, hospital, schools, banks and many other places.

Installation:

Install 12dBi dual LPDA antenna with RG-8 cable in pole of your building with the help of screws, nuts and clamps provided with the antenna. Fix the antenna in vertical position and keep in mind that your antenna is pointed in the direction of cell tower. Then, connect the cable with the antenna as well as with the router.

Electrical parameters:

Gain: 12dBi

Impedance- 50 Ohm

Antennas polarization: Directional

Antennas connector: N-female

Frequency range: 698-2700MHz

Antenna & cable kit weight: 3840 gram

Cable connector: N male to SMA male connector

Cable type: RG-8 coaxial cable

Cable length : 15 meter

Additional Information:

• Production Capacity: 1000
• Delivery Time: 5-7 days
• Packaging Details: 2 ¿¿ 12dBi LPDA antenna, 2 ¿¿ RG-8 coaxial cable 15 meter

Product Details:

We offer polyethylene Heat shrinkable sleeve for coaxiable LMr 400 cable. The polyethylene Heat Shrink Tubes we offer conform to international quality standards. The shrinking temperature of our Polyolefin Heat Shrink Tube is very low and these tubes can shrink very quickly.

Additional Information:

• Delivery Time: 2-5 days